
-
Unscrew Fixing Screws:
- Each fan shroud is fixed by two screws on one side. Be aware that these screws also hold the bunch of wires for the hot-end.
- Unscrew both screws carefully.
-
Remove Upper Shroud:
- Carefully remove the upper shroud along with the screws.
-
Remove Fan Shroud:
- Remove the fan shroud along with the fan itself.
-
Disconnect Fan Shroud:
- Carefully disconnect the fan shroud from the fan.

-
Connect Fan Shroud:
- Connect the fan shroud with the fan.
-
Position Fan Shroud:
- Place the fan shroud above the hot end and align its holes with the holes on the hot end side.
-
Install Upper Shroud:
- Place the upper shroud with screws above the fan shroud and tighten the screws slightly.
-
Position Wires:
- Place the wires in the upper shroud wire channel.
-
Tighten Screws:
- Tighten the screws securely but without excessive force.