Vision Miner Wiki
Guides

Quick Start Guide

Follow these steps in order to set up your Vision Miner 22 IDEX and get to your first successful print. Each step links to a full guide with detailed instructions.

Before you begin: Read the Safety article before performing any work on the printer.

From a freshly delivered crate to a finished part on the build plate, work through each step in order. Every step links to a dedicated article with the complete procedure, and steps with a video have a button in the top-right corner that opens the matching chapter in the videos below.

Unboxing VideoUnpack and inspect the printerComplete Setup VideoFull guided setup with chapter timestamps

Initial Setup

Unboxing

Carefully unpack and prepare your printer for first use.

Installation RequirementsOptional

Ensure your workspace meets the necessary environmental and power criteria.

Network Connection

Connect your printer to the network. Choose the method that fits your setup:

WiFi

Connect wirelessly via your local network.

Ethernet

Wired network connection.

Operating the Machine

Interface OverviewOptional

The interface is self-explanatory. Refer to this guide if you need additional guidance.

Firmware Update

Always keep your firmware up to date to ensure you have access to all features and functionality.

Auto CalibrationOptional

Your machine comes pre-calibrated from the factory. This step is optional.

Prepare to Print

Filament Loading

Learn how to correctly load filament into both toolheads.

Slicer Setup

Install and configure PrusaSlicer with Vision Miner profiles.

NPA Application

Apply Nano Polymer Adhesive to the build plate before your first print.

First Print

Prepare the build plate, slice a model, and start your first print.

On this page

Initial SetupOperating the MachinePrepare to Print

Your feedback makes it better for everyone.